Home > Fully Threaded Studs >

ASTM A36 HDG Carbon Steel Fully Threaded Studs

Product Categories

Steel Nut Bolts [40]
Steel Hex Bolt [58]
Carbon Steel Bolt [52]
High Tensile Stainless Steel Bolts [41]
Carbon Steel Nuts [87]
Stainless Steel Nut [51]
Steel Flat Washer [28]
Spring Steel Washers [15]
Stainless Steel Washer [13]
Fully Threaded Studs [21]
Non Standard Fasteners [28]
Seismic Wedge Anchors [25]
Self Tapping Screw [26]
Electrical Fasteners [11]
Solar Panel Fasteners [44]
Stainless Steel Shackle [43]

Jiaxing City Qunbang Hardware Co., Ltd

Trust Seal

Verified Supplier

Credit Check

Supplier Assessment

Contact Now

ASTM A36 HDG Carbon Steel Fully Threaded Studs

Ask Lasest Price
Brand Name :	QBH
Model Number :	1/4--4inch
Certification :	ISO9001
Price :	Negotiation
Payment Terms :	L/C, T/T,OA
Supply Ability :	600TON/MONTH
Delivery Time :	30days

Add to Cart

Product Details
Company Profile

ASTM A36 HDG Carbon Steel Fully Threaded Studs

Specification

A threaded rod, also known as a stud, is a relatively long rod that is threaded on both ends; the thread may extend along the complete length of the rod. They are designed to be used in tension. Threaded rod in bar stock form is often called all-thread.

All thread rod, commonly referred to as fully threaded rod, redi-rod, continuously threaded rod, TFL rod, and abbreviated ATR is used for general purpose fastening for anything from an anchor bolt to a through bolt. A variety of grades and materials are available.

ASTM A36 HDG Carbon Steel Fully Threaded Studs

Screw Thread
d

d
PP	UNC
	UNF
	8UN
u	max	UNC
		UNF
		8UN

0.2500	0.3125	0.3750	0.4375	0.5000	0.5625	0.6250	0.7500	0.8750	1.0000	1.1250	1.2500	1.3750
20	18	16	14	13	12	11	10	9	8	7	7	6
28	24	24	20	20	18	18	16	14	12	12	12	12
-	-	-	-	-	-	-	-	-	-	8	8	8
0.100	0.111	0.125	0.143	0.154	0.167	0.182	0.200	0.222	0.250	0.286	0.286	0.333
0.071	0.083	0.083	0.100	0.100	0.111	0.111	0.125	0.143	0.167	0.167	0.167	0.167
-	-	-	-	-	-	-	-	-	-	0.250	0.250	0.250

Screw Thread
d

d
PP	UNC
	UNF
	8UN
u	max	UNC
		UNF
		8UN

1.5000	1.6250	1.7500	1.8750	2.0000	2.2500	2.5000	2.7500	3.0000	3.2500	3.5000	3.7500	4.0000
6	-	5	-	4-1/2	4-1/2	4	4	4	4	4	4	4
12	-	-	-	-	-	-	-	-	-	-	-	-
8	8	8	8	8	8	8	8	8	8	8	8	8
0.333	-	0.400	-	0.444	0.444	0.500	0.500	0.500	0.500	0.500	0.500	0.500
0.167	-	-	-	-	-	-	-	-	-	-	-	-
0.250	0.250	0.250	0.250	0.250	0.250	0.250	0.250	0.250	0.250	0.250	0.250	0.250

ASTM A36 covers the chemical and mechanical requirements for carbon steel shapes, plates, and bars of structural quality for use in riveted, bolted, or welded construction of bridges, buildings, and general structural purposes. Bolts manufactured from A36 steel include ASTM specifications A307 and F1554 Grade 36 as well as SAE J429 Grade 2.

A36 Mechanical Requirements

Tensile, ksi	58 - 80
Yield, min ksi	36
Elongation, min % in 2”	20
Elongation, min % in 8”	23
This abridged table shows only the mechanical requirements for bars. The complete table can be found in the ASTM standard at www.astm.org

A36 Chemical Requirements

Thickness, inches	Up to 3/4"	Over 3/4" to 1-1/2"	Over 1-1/2" to 4"	Over 4"
Carbon, max %	0.26	0.27	0.28	0.29
Manganese, %		0.60 - 0.90	0.60 - 0.90	0.60 - 0.90
Phosphorous, max %	0.04	0.04	0.04	0.04
Sulfur, max %	0.05	0.05	0.05	0.05
Silicon, max %	0.40	0.40	0.40	0.40
Copper, min % when copper is specified	0.20	0.20	0.20	0.20
This abridged table shows only the chemical requirements for bars. The complete table including shapes and plates can be found in the ASTM standard at www.astm.org

Appurtenant Materials

When components of a steel structure are identified with this ASTM designation, but the product form is not listed in the scope of this specification, the material shall conform to one of the standards listed below unless otherwise specified by the purchaser.

A36 Appurtenant Materials

Material	ASTM Designation
Bolts	A307 Grade A
High Strength Bolts	A325
Nuts	A563
Forgings	A668 Class D
Anchor Bolts	F1554 Grade 36
Table abridged to show only those items relevant to Portland Bolt

Commentary Regarding Appurtenant Materials

This is not to say that the materials listed above conform to or can be made from A36 steel, simply that if the purchaser calls out a product per A36, but one that is not covered in the above scope (shapes, bars, plates), the manufacturer or supplier can supply product conforming to the above standards. For example, anchor bolts called out as A36 would be supplied as F1554 Grade 36.

Materials and Chemical compstition

1008

CHEMICAL COMPOSI %
C	Si	Mn	P	S	Cr	Ni	Cu	Al
0.06	0.06	0.33	0.013	0.003	0.01	0	0.01	0.028

1035

CHEMICAL COMPOSI %
C	Si	Mn	P	S	Cr	Ni	Cu
0.34	0.13	0.73	0.012	0.002	0.02	0.01	0.02

10B21

CHEMICAL COMPOSI %
C	Si	Mn	P	S	Cr	B
0.2	0.04	0.81	0.017	0.007	0.017	0.0021

1045

CHEMICAL COMPOSI %
C	Si	Mn	P	S	Cr	Ni	Cu
0.45	0.23	0.58	0.014	0.006	0.057	0.008	0.016

40CR

CHEMICAL COMPOSI %
C	Si	Mn	P	S	Cr	Ni	Cu
0.4	0.21	0.54	0.015	0.008	0.95	0.02	0.02

35CRMO

CHEMICAL COMPOSI %
C	Si	Mn	P	S	Cr	Ni	Cu	Mo
0.35	0.22	0.59	0.01	0.003	0.93	0.01	0.01	0.21

42CRMO

CHEMICAL COMPOSI %
C	Si	Mn	P	S	Cr	Ni	Cu	Mo
0.42	0.27	0.92	0.013	0.004	1.01	0.03	0.04	0.2

stainless steel

	化学成分CHEMICAL COMPOSI(% )
Type	C碳	Si硅	Mn锰	P磷	S硫	Ni镍	Cr铬	Mo钼	Cu铜	Others
Type	≤	≤	≤	≤	≤	≥	≥	≥	≈
201Cu	0.08	1.00	7.5-10	0.06	0.03	4.00-6.00	14.0-17.0		2.0-3.0
201	0.15	1.00	8.50	0.06	0.03	3.50-5.50	16.0-18.0			N≤0.25
130M/202	0.15	1.00	7.5-10	0.06	0.03	4.00-6.00	17.0-19.0			N≤0.25
202	0.15	1.00	7.5-10	0.06	0.03	4.00-6.00	17.0-19.0
301	0.15	1.00	2.00	0.045	0.03	5.00-8.00	16.0-18.0
302	0.15	1.00	2.00	0.045	0.03	8.00-10.0	17.0-19.0
XM7 (302HQ)	0.08	1.00	2.00	0.045	0.03	8.50-10.5	17.0-9.00		3.0-4.0
303	0.15	1.00	2.00	0.20	≥0.15	8.00-10.0	17.0-19.0	≤0.60
303Cu	0.15	1.00	3.00	0.20	≥0.15	8.0-10.0	17.0-19.0	≤0.60	1.5-3.5
304	0.08	1.00	2.00	0.045	0.03	8.00-10.0	18.0-20.0
304H	0.08	1.00	2.00	0.045	0.03	8.0-10.0	18.0-20.0
304HC	0.08	1.00	2.00	0.045	0.03	8.00-10.0	17.0-19.0		2.0-3.0
304HCM	0.08	1.00	2.00	0.045	0.03	8.0-10.0	17.0-19.0		2.5-4.0
304L	0.03	1.00	2.00	0.045	0.03	9.0-13.0	18.0-20.0
304M	0.06	1.00	2.00	0.045	0.03	8.50-10.0	18.0-20.0
305	0.12	1.00	2.00	0.045	0.03	10.5-13.0	17.0-19.0
305J1	0.08	1.00	2.00	0.045	0.03	11.0-13.5	16.5-19.0
309S	0.08	1.00	2.00	0.045	0.03	12.0-15.0	22.0-14.0
310S	0.08	1.50	2.00	0.045	0.03	19.0-22.0	24.0-26.0
314	0.25	15.-3.0	2.00	0.040	0.03	19.0--22.0	24.0-26.0
316	0.08	1.00	2.00	0.045	0.03	10.0-14.0	16.0-18.0	2.0-3.0
316Cu	0.03	1.00	2.00	0.045	0.03	10.0-14.0	16.0-18.0	2.0-3.0	2.0-3.0
316L (12Ni)	0.03	1.00	2.00	0.045	0.03	12.0-15.0	16.0-18.0	2.0-3.0
316L (10Ni)	0.03	1.00	2.00	0.045	0.03	10.0-14.0	16.0-18.0	2.0-3.0
321	0.08	1.00	2.00	0.045	0.03	9.00-13.0	17.0-19.0			Ti≤5*C%
410	0.15		1.00		0.03		11.5-13.5
416	0.15		1.25		≥0.15		12.0-14.0
420	0.26-0.4		1.00		0.03		12.0-14.0
410L	0.30	1.00	1.00	0.040	0.03		11.5-13.5
430	0.12	0.75	1.00	0.040	0.03		16.0-18.0
430F	0.12	1.00	1.25	0.060	0.15		16.0-18.0
631(J1)	0.09	1.00	1.00	0.040	0.03	6.50-8.50	16.0-18.0			AL 0.75-1.5
2520	0.08	1.00	2.00	0.035	0.03	19.0-22.0	24.0-26.0
410	0.015	1.00	1.00	0.04	0.03		11.5-13.5

Finish

PLAIN ZP YZP BLACK HDG DACROMET GEOMET CHROME NICKEL AND SO ON

PACKING

QBH BULK

20-25KG/CTN,36CTNS/PALLET

20-30KG/BAGS,36BAGS/PALLET

ONE TON/BOXES

50KG/ IRON DRUM,12 IRON DRUMS/PALLET

QBH SMALL PACKING

Packing in small boxes according to customer’s requirements

Packing in plastic bag according to customer’s requirements

QBH PALLET TYPE

SOLID WOOD FUMIGATION PALLET

EURO Pallet

THREE SPLINT PALLET

WOODEN BOX

The advantages of QBH

QBH brand sales to the main quality assurance.
Years of export trade management, excellent service, word-of-mouth guarantee.
By working with TUV,escort for quality.
Customization of non-standard parts can be made according to customer's requirements and drawings.
For quality customers,we can provide a certain credit period.

Product Tags:


*From:	Your email address is incorrect!
*To:	Jiaxing City Qunbang Hardware Co., Ltd
*Subject:	Subject is empty!
*Message:	For the best results, we recommend including the following details: -Self introduction -Required specifications -Inquire about price/MOQ Characters Remaining: (0/3000) Please enter 20 to 3000 characters to contact this supplier!